ibbw-mayser provider logoOpen for submissions

Digital Hat Block Development: From Atelier Idea to Production-Ready 3D Data

Mayser seeks a partner to digitalise hat block development: turn physical references or design ideas into editable 3D shapes, adapt them across sizes, test physical prototypes in the atelier and hand over reliable data for production tooling. The goal is faster development with Mayser in control.

#3DProductDevelopment#DigitalCraftsmanship#VentureClienting

Objective

Mayser seeks to establish a digital hat block development process that is operated directly in its atelier. It should lead from capturing an idea or reference to a tested physical prototype and a released 3D data set from which the production site can manufacture the serial tool economically.

PoC Goal

Within the Venture Client framework, validate on one representative hat block selected by Mayser (neither the simplest nor the most complex shape) that the solution:

  • Uses the reference provided by Mayser (a finished hat and/or existing wooden block) to create editable 3D geometry of crown and brim. Where a finished hat is used, the provider should explain how the required block geometry is derived, accounting for material thickness and forming behaviour rather than simply copying the outer surface.
  • Reaches the target shape closely enough that the physical prototype passes the real hat test in the atelier (size, height, width, fit and appearance)
  • Allows atelier staff, after training, to make a relevant shape change in the digital model and reproduce it in a new physical prototype (at least one documented change loop)
  • Demonstrates grading from the master shape to selected additional head sizes using consistent, reusable rules that preserve the intended fit and design proportions
  • Delivers a released, versioned data set that Mayser's production site and its tooling supplier confirm as suitable for tool manufacturing
  • Is usable by the atelier team and shows its effort, investment and running costs compared to today's process

Mayser will select a representative reference shape and provide its dimensions before the PoC starts. Dimensional tolerances, measurement methods, forming conditions and acceptance criteria are still to be defined with the atelier, production team and selected provider in the scoping workshop. The pilot will test a limited selection of sizes, with a clear route to the relevant full size range.

Long-Term Goal

Anchor digital hat block development as the standard process in the atelier for all new shapes and connect it economically to aluminium tool manufacturing for serial production, for example via printed casting patterns and targeted machining. Virtual fit checks, material simulation and variant building supported by artificial intelligence (AI) can be added once their benefit and material basis are proven.

Solution Requirements

Functional

  • 3D capture of existing hats or hat blocks and digital construction and modification of shapes. Providers should explain their proposed starting point and any manual preparation or modelling required.
  • Editable 3D models of crown and brim, including head shape and oval, local radii and transitions, brim width and brim curve, and asymmetric details. Visual renderings alone are not sufficient.
  • Dimensional accuracy verified against agreed reference measurements, with symmetry where intended and deliberate asymmetric details preserved. Required tolerances in millimetres will be agreed before the PoC starts.
  • Grading to further head sizes, typically within 54 to 63 cm head circumference. The method must preserve fit and design intent and allow dimensions such as crown height, oval and brim width to be controlled rather than uniformly scaling every dimension.
  • A defined route to physical prototypes for atelier evaluation and real hat-forming tests. The provider should specify the proposed process, material and equipment, and explain suitability for the temperature, steam, pressure and number of test cycles agreed for the selected reference. Long-term durability as a serial production tool is not required in this PoC.
  • Version management and an unambiguous handover of the released data state

Technical & Security

  • Delivery of editable 3D data in the native format plus a standard exchange format agreed with Mayser
  • A released, versioned 3D data set including dimensions and tolerances that Mayser's production site can use for tool manufacturing. Tool-specific details are aligned with the production team.
  • Mayser must be able to retain, use, edit and export the geometry and design data created for its products. Data handling and usage rights will be aligned before collaboration starts.
  • Transparent data storage and hosting, including server location, and the ability to pass Mayser's internal information technology (IT) review
  • Required hardware and software must be specified. The atelier currently works with standard graphics tools only and has no 3D hardware or software.

Operational Readiness

  • Operable by the design atelier without a CAD engineering background after training. Work instructions and training are part of the solution.
  • Proposals should state the PoC cost, what is included, any additional hardware or software investment, and expected running costs. The solution must remain economical for a mid-sized company; six-figure investment proposals are outside the intended scope.
  • Collaboration in English; German is a plus

Partner Profile

  • Willingness to capture the atelier's craft knowledge together with the design team and translate it into editable geometry and testable criteria
  • Proven projects with fine 3D shapes and both digital and physical results, e.g. in fashion, footwear, textiles or other precise products
  • Understanding of material behaviour and of the connection to industrial manufacturing
  • A dedicated team that gives the pilot real focus and takes the craft and its history seriously
  • Providers may focus on the digital core (capture, modelling, grading and data handover) and work with partners for physical prototyping. The aim is to enable Mayser to run the core workflow in-house after training. In-house prototyping equipment can be considered if its benefit and cost are clear.

Nice-to-haves

  • Virtual fit check on a digital head or avatar
  • Simulation of stretching and deformation of felt or straw
  • AI support for variants, model building and size grading
  • Experience connecting 3D data to tool manufacturing, e.g. printed patterns for aluminium casting
  • References in hats, footwear, fashion or other textile forms

Not in Scope

  • Replacing the designers' creative judgement and final release decision
  • Pure visualisation, rendering or recolouring without editable, dimensionally accurate geometry
  • Manufacturing of the serial aluminium tool in the PoC. This is handled by Mayser's production site and its suppliers and is a possible follow-up step.